Mercedes Benz Diagnostic Tool «

Mercedes Benz Diagnostic Tool

MB SD Connect 4 local area connections and administration parameter settings

March 3, 2012

MB SD Connect 4 local area connections and administration parameter settings

Most users have problem with MB SD connect4 local area connections settings and configuration settings. In the following parts, I will show you how to do these settings.

Step one: set SD connect 4 local area connection Internet Protocol (TCP/IP) Properties
IP address as: 172.29.127.119
subnet mask: 255.255.0.0

Step two: SD connect4 configuration change
Click “configuration” then a windows named “Warning” apears, says “Caution! Changing the configuration can impair the fault-free functioning of the system. Do you want to change the configuration?
Select “Yes”

Step three: SD connect4 MUX register configure setting
Click “MUX” button, then in the multiple choice box, please click “Register/Configure”

Step four: Select the name for SDCONNECT
Select the name for SDCONNECT as 4

Step five: SD connect4 WLAN parameter road setting
Set WLAN parameters, Road including: ID address, Network screen, SSID (network name), Encryption, key/
ID address: 192.168.2.200
Network screen: 255.255.255.0
SSID (network name): Road24h
Encryption: WEP/Hex
key:aaaaaaaaaaaaaaaaaaaaaaaaaa

Step six: Sdconnect toolkit device configuration
SDconnect Toolkit administration information conclusion including:
General information, WLAN conficuration, LAN configuration

Watch video on MB SD Connect Compact 4 local area connection and administration parameter settings at:
http://www.youtube.com/watch?v=Zo2jpewQSYI

Or directly browse
http://www.uobd2.com/wholesale/mb-sd-connect-compact-4-star-diagnosis.html then selects column “Video” to watch how to set SDconnect 4 local area connection and administration parameter.

: Bluetooth OBD scanner, Mercedes Benz diagnosis, OBDII SCANNER, pc based obd ii scanner, star diagnosis Mercedes

MB SD Connect C4 5pcs improved advantages

October 28, 2011

MB SD Connect C4 5pcs improved advantages compared to old star diagnosis:
1)support UDS chip: Old MB STAR C4 doesn’t support UDS chip, while sd connect c4 support UDS chip, besides support K line and CAN BUS;
2)MB SD Connect C4 support wireless diagnose;
3)1pc x LAN Cable: SD Connect C4 use LAN cable to connect, this means the computer without COM PORT is also allowed to work with SD connect C4. While SD connect you buy from uobd2.com have to use with Dell 630 computer.
4)SD Connector c4 adopt Military quick swap technology, it can support 10,000 times pull plug, more stable;
5)Multi-language available: Support multi-language, such as English, German, French, Italian, Spanish, Portuguese, Danish, Finnish and Swedish and so on. This means, Sd Connect Compact4 is not only limited on English-speaking users.

Remark: actually, MB SD connect C4 is another star diagnostic tool, coming to Mercedes Benz star diagnosis, you may have some impression to the following tools.

Collections of top MB star diagnosis.
Mb star c3

Best quality Mb star c3
MB star c4
Super MB star
MB star c3 HDD
Twinb C4+GT1
MB carsoft 7.4

Buy star C3 or star C4 or super MB star or SD connect c4
Among c3,c4, super mb star, SDconnect, have no idea which to buy? Doubt if they will work with your car? I have a PDF making a thorough explanation on C3 VS C4 VS super MB star.�
After you finish reading this PDF and then have an idea on C3, C4 and super mb star similarities and differences, have you go back to compare them with sd connect C4? Have you find mb sd connect C4 5pcs improved advantages or even more advantages?

Welcome you give us a feedback.

: Mercedes Benz Diagnostic Tool

: benz star, mb star, Mercedes Benz star, star, star diagnosis

How to install DAS XENTRY 7-2011?

October 8, 2011

DAS XENTRY 7-2011 Installation Guide:
1: Install fresh WinXp SP3 and all drivers

2: Partion Ur HDD. Make sure C:Star D:Recover E:Wis F:DAS.

3: Make new user STAR.

4: Install JC softs and SDI as well + regedit for C4 + stop screen saver + edit power managment.

4: Delete C3 from regedit (H_K_Local_Machine ==> Softwares ==> StarDiagnosis).

5: Install IE 8

6: Install Netframe 3.5 Sp1

7: Copy Commonlic to system32 (Make read Only).

8: Copy commonlic to:
C:\WINDOWS\Temp\{17B8B381-50E5-470D-A6B3-C494240AF33C}\{22A937EF-8C64-11D7-A9EE-00D009D07BEF} (It will look like this name But every restart, the name may change.

9: Copy Commonlic to C:\Documents and Settings\STAR\Local
Settings\Temp\{892805C2-7E95-4EFB-8D58-5D8E9AD842A1}\{22A937EF-8C64-11D7-A9EE-00D009D07BEF}
(It will look like this name But every restart, the name may change).

Note: when installation Just starts, C:\WINDOWS\Temp\… folder will be created thus u make the replace. After 1st restart, C:\Documents and Settings\STAR\Local Settings\Temp\… will be created, so u make the replace right there. ( I added this note because one guy complained that he doesnt have these folders)

Note: Make shortcuts for the two folders mentioned (C:\WINDOWS\Temp & C:\Documents and Settings\STAR\Local Settings\Temp)
because everytime the PC will start u have to replace and b4 setup starts.

10: Replace Commonlic in Star utilities. Apply Keys and Move on.

11: Setup will go smooth and suddenly ull get error Code 5011: 0×80040707
Setup will terminate

12: Apply JC unrestrict FIX to see all Drives because they will be hidden.

13: Copy SDflash from SD_DVD to F:\Programme\DAS

14: Goto F:\Programme\DAS\SDflash\Release\PKW and extract #FDOK
15: Goto F:\Programme\DAS\SDflash\Release\SMART and Extract #FDOK
16: Goto F:\Programme\DAS\SDflash\Release\Transp and Extarct #FDOK

17: Copy and Paste folder C:\USERDATA into F Drive. (Great members warned me about this point since I 4got to mention it when I just wrote this guide ).

18: Place DAS SIM and DAS Shortcuts on desktop:
DAS shortcut target as: F:\Programme\DAS\bin\DAS32R2.exe -len
And for DAS SIM Target as: F:\Programme\DAS\bin\simdas.exe -*CALsimu -*ctxtsim.sli -*nolog -*len

19: If u want to RUN DAS Without Xentry so place the DAS32R2.exe Fix in DAS BIN and make shortcut.
20: Goto Drive Letter:\stardiag\Xentry_Frame and Start installing Xentry.

21: After Xentry Finish Installation, goto: Drive Letter:\stardiag\AddOn_Frame and start installing Addons.

22: B4 u restart, goto Run and type control userpasswords2 then reset STAR Password and Make windows Autologin in to STAR.

23: After restart, Apply Xentry Error Fix 3-2011 or 5-2011 ( All are working).

24: If ur using sdconnect then open cal.ini and change PLATFORM=PART_W (it was T B4).

25: Internet in ur pc will not work (sp browsing sites) to solve this goto: C:\Programme\SDnetControl and rename networkfilter
next restart it will not load the networkfilter. U can stop networkfilter by: Ctrl + Alt + Dlt ==> proccess and stop it.

26:If ur using sdconnect, during diagnosis, pop message will appear about firmware update. You can disable the update message for Sdconnect by renaming Automatic update folder in: C:\Program Files\SDconnect Toolkit
Inmycase I renamed update spiceal and manual as well.

: Mercedes Benz Diagnostic Tool

: DAS, installation, setup, XENTRY